C Description Rho 1012/1030
During printing, the print carriage (3) passes over the medium. The print
heads on the print carriage print the medium with ink. The UV lamps in the
UV lamp head (4) dry the ink on the medium.
The printer is operated at the workstation (6).
Plate media
Usage of the automatic feed table (8) allows plate m edia (7) to be fed
continuous ly on a larger scale.
If a registering table is used, thin plate media can be fed manually.
Compressed-air-controlled stops ensure optimal alignment of the plate
medium.
On the unloading side the printed plate medium is output on the automatic
removal table (2). If the stacking unit (1) is used, the plate medium can be
stacked.
Roll media
The automatic feed table (8), on which a roller attachment is mounted, can
be used to print smaller roll media.
AHeavyRollToolcanbedockedontotheprinterontheloadingand
unloading sides to printer lar ger roll media.
If an XY cutter is used, the roll medium can be can cut in the longitudinal and
transverse direction on the unloading side.
24 / 1 47 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13
To Next Page
Loading...
