E Operation Rho 1012/1030
Fig. 27 Connect the power and control cables.
4. Connect power cable to the connector on the unwinding unit and to the
connector on the printer (1).
5. Connect the control cable (2) to the connect
ion on the unwinding and
winding un its.
6. Set the key switch at the printer to 1 (normal mode).
56 / 1 47 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13
To Next Page
Loading...
