E Operation Rho 1012/1030
Fig. 47 Blowing compressed air into the valve
2. To secure the roll on the axis, place air blow gun o
n valve and fill
compressed air into valve. Observe the permiss
ible air pressure specified
by the manufacture in the process.
The roll is secured to the axis via th e locking jaws.
82 / 1 47 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13
To Next Page
