E Operation Rho 1012/1030
10.3.6 Setting the roll-end sensor
Fig. 49 Setting the roll-end sensor
Set the roll-end sensor (1) on the unwinding unit to the desired height.
10.3.7 Commissioning unwinding and winding units
Carry out the following measures on both th
e loading and unloading sides.
84 / 1 47 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13
To Next Page
Loading...
