not have a wire in it (all recent Dynon harnesses).
Clarified future use of connected TSO’d GPS to
transponder for ADS-B 2020 mandate compliance.
Clarified that a broken shear screw may be indicative of a
more systemic problem that needs to be resolved.
Added serial port test to ensure that ports are configured
correctly on all displays.
Better explanation of cases when fuel tank / sensor
geometry prohibits display of all fuel in tanks.
Added Kavlico Fuel, Oil, and Coolant Pressure sensor
information.
Clarified external dimming input.
Added Rotax 912 special oil temp / tachometer behavior.
Added altitude alerter setup information.
Added EMS 5/12V output current limitations
information.
Added 3
rd
party two wire oil temperature sensor
connection instructions.
Added procedure for performing pitot/static checks.
Updated map setup instructions as former setup items
are not user-accessible via normal SkyView UI.
Clarified settings changes necessary to support capacitive
fuel quantity senders.
Added audio output connection instructions.
Updated CWS Broken Line Detect instructions to reflect
that the feature is now available.
To Next Page
Loading...
