HEALTH AND SAFETY
1-6 25364 Issue 8 March 2018
Replacing the Ribbon
Heating Element
Organic Solvents
Battery Replacement
Fuses Fire Hazard
Care must be taken when replacing ribbons to avoid cutting
hands or fingers.
The heating element and surrounding area become very hot
during use. To avoid the risk of burns, never touch the
heating element area of the print head.
Cleaning fluid contains organic solvents. Always wear
suitable PPE (goggles and clothes) to avoid contact with the
eyes and skin. Avoid inhalation of the vapour. Do not smoke
in the presence of the vapour or the vicinity of the printer.
Replaceable batteries should only be replaced using
batteries of the correct specified type and rating. Failure to
do so may result in an explosion hazard.
Used batteries should be disposed of according to the
battery manufacturer’s instructions.
To ensure continued protection against the risk of fire,
replace fuses with the specified type and rating only.
To Next Page
Loading...