HEALTH AND SAFETY
25364 Issue 8 March 2018 1-7
Caution Notices
Caution notices denote a potential hazard to the physical integrity of
equipment / software but not a danger to personnel. These notices clearly
state the nature of the hazard and the means by which it can be avoided.
Damage to Print Head
Loss of Counter Data
Cable Routing
Mains Supply Voltage
Cleaning Materials for Print Head
Changing the print head without setting the new resistance
value may cause severe damage to the print head.
The counter values are not retained when the printer is
switched off.
To avoid damage to the cables or equipment, ensure that
the cables are routed clear from any moving parts.
To avoid damage to the equipment, do not exceed the
supply voltage stated in this manual. See “TECHNICAL
REFERENCE” on page 5-1.
To avoid damage to the printer components, use only soft
brushes and lint-free cloths. For cleaning, always use
Cleaning Pens (P/N VPR0223), Cleaning Fluid (P/N WJ-111)
and Print Head Cleaning Wipes (P/N MT25215).
Do not use high pressure air, cotton waste, abrasive
materials, metallic objects or degreasing cleaning fluids
(e.g., Benzene, acetone).
To Next Page
Loading...