DESCRIPTION AND INSTALLATION
2-38 25364 Issue 8 March 2018
PC to Networked Printers
Refer to the example network diagram on page 2-35.
Printer Network Settings
All printers and controllers are set up to connect to each other out of box.
Ethernet
Set the Ethernet setting as required for the connected printer.
DHCP will automatically assign IP addresses on a dynamic network.
The default settings are as follows:
• Enable DHCP (DHCP is NOT enabled by default)
• Printer IP address: 192.168.125.201
• Touchscreen IP address: 192.168.125.200.
Printer Slaves
The Printer Slaves function allows one printer to control up to 10 other
networked printers performing the same task. The user can also add or
remove a slave printer, as well as edit the details of an existing printer.
To employ the master/slave printer relationship, at least two printers are
required on the same network. One printer is selected as the master printer,
which can forward print jobs to one or more slave printers.
To Next Page
Loading...