MAINTENANCE, SERVICE AND FAULT FINDING
25364 Issue 8 March 2018 4-53
1220 Error Creating Design
Item
The item could not be created.
1221 Error Creating
Variable
The variable could not be created.
1222 Unknown Barcode
Type
The barcode item contains info about a
type currently unknown. Check the
design.
1223 Bad Label Design
Version
The design version could not be read
correctly. Design could be damaged.
Check design.
1224 Error Reading Design The design could not be loaded.
Design could be damaged. Check
design.
Possibly an incorrect filename was
specified. Check filename.
1225 Unable to start
printing due to an
error
At least one error was encountered
during the loading of the design.
Printing cannot take place. Check the
preceding errors.
1226 Printing halted due to
an error
An error was encountered in the
printing process that has halted the
print. Check the preceding errors.
1227 Error Reading Design Field(s) could not be read. Design
could be damaged. Check design.
1228 Unknown error while
reading design
Design could be damaged. Check
design.
1229 Unable to print.
System log failed
On a 21 CFR - Part 11 compliant
system, printing cannot start if the
system log fails. Check free space.
1230 Invalid anchor point The anchor point setting could not be
set. Check transmission.
1231 Error receiving design
item
Error encountered while receiving a
label. Check transmission.
1232 Item Did Not Fit Label The item could not be inside the label
border. Check the field.
1233 Set edit item tokens Retry operation. If problem persists,
contact service technician.
1241 Text Did Not Fit Block The text entered does not fit into the
specified rectangle. Check the design
item.
1242 Word Did Not Fit Max
Width
A word was longer than the line length.
Check the field size and the text.
Error No. Error Text Action
To Next Page
Loading...
