Edge-Core ECS2020 Series User Manual

102
8.1.2 Configure power supply mode
8.1.2.1 Configure power supply mode to automatic
Click on the navigation bar "PSE System Management" "PSE System Configuration" to configure power supply mode
to automatic mode
Figure 8-2: Automatic Mode
To configure the switch PSE System steps as follows:
Step 1: In the power supply mode, choose automatic mode;
Step 2: Click on "Apply Settings" button to complete the configuration

Edge-Core ECS2020 Series Specifications

General

Brand	Edge-Core
Model	ECS2020 Series
Category	Switch
Language	English