15
4.1.2 Configuring port properties
Click the icon to configure the selected port attributes:
Figure 4-2: Port Properties Configuration
Configure port properties as follows:
Step 1: Click the "Edit" icon .
Step 2: In the Port Properties configuration page, fill/select the value to be configured.
Step 3: Click the "Apply" button to complete the configuration.
4.2 STORM CONTROL
4.2.1 Check the storm control port settings
On the navigation bar, click "Port Management" and then "Storm Control" to view the current switch port storm
control information.
Figure 4-3: Storm Control List Information
To Next Page
Loading...
