79
7.3 SYSTEM UPGRADE
Click the "System Management" "System Upgrade" to upgrade the software on the switch:
Figure 7-17: Switch System Upgrade
Switch system upgrade steps are as follows:
Step 1: Click "Choose File" button to select the switch upgrade file;
Step 2: Click the "Upgrade" button switch to start the upgrade new software;
Step 3: When the upgrade progress bar is at 100%, the switch will automatically reboot, completion of the upgrade is
completed.
7.4 SYSTEM INFORMATION
7.4.1 Memory information
Click on the "System Management" "System Information" "of" the Memory Information into the Memory
Information interface, can view the System Memory Information:
Figure 7-18: System Memory Information
To Next Page
Loading...
Need help?
General