61
6.8.1.5 IGMP Version
Click the "Fault/Safety" "IGMP Snooping", set the IGMP version of the page:
Figure 6-45: Configuration IGMP Version
IGMP version configuration steps are as follows:
Step 1: Select the required version number;
Step 2: Click the "Apply" button to complete the configuration.
6.8.2 MLD
6.8.2.1 View MLD configuration
Click the "Fault/Safety" "IGMP Snooping" to check the current switch configured multicast monitoring information:
Figure 6-46: View MLD Configuration Information
To Next Page
Loading...
