71
7.1.2 System restart
Click on the navigation bar "System Management" "System Settings" "System Restart" to reboot the switch:
Figure 7-3: System Restart
Restart the device, follow these steps:
Step 1: Click on "Restart the device immediately" button;
Step 2: Click OK in the box that pops up "OK" button;
Step 3: Prompted to save the current configuration, depending on your need to select "OK" or "Cancel";
Step 4: After the restart the progress bar moves to 100%, reboot the device.
7.1.3 User Management
Click on the navigation bar "System Management" "System Settings" "User Management" to modify the super user
password and telnet password:
Figure 7-4: Change Password
To Next Page
Loading...
Need help?
General