33
5.1.5 View port mode
Click on the "VLAN Management" "Port Mode" view switches has been configured port mode information:
Figure 5-7: View Port Mode Configuration Information
Displayed in the port mode list is the property value of the port configuration of the current switch:
1. The port name: display port number used;
2. The Native VLAN: display native VLAN:
3. The allowed VLAN: the VLAN allows the display message can be through VLAN;
4. The default port is 1 VLAN native VLAN.
5. The default port mode is access.
5.1.6 Change the port mode is trunk
Select the port you want to change the mode and click the "Port Mode" list, you can set the port mode is trunk:
Figure 5-8: Change the Port Mode is Trunk
To Next Page
Loading...
Need help?
General