Edge-Core ECS2020 Series

87
7.7.2 Activate the SNMP
Click ON the "System Management" "SNMP", choose the SNMP service, click ON the "OFF" to "ON", click ok:
Figure 7-27: Activation SNMP Function
Activation function SNMP configuration steps are as follows:
Step 1: Choose open SNMP options;
Step 2: Click "OK" button to complete the configuration.
7.7.3 To disable the SNMP
Click ON the "System Management" "SNMP", choose the SNMP service, click ON the "ON" to "OFF", complete the
configuration:
Figure 7-28: Disable the SNMP Function
Disable the SNMP function configuration steps are as follows:
Step 1: Choose close SNMP options;
Step 2: Click "OK" button to complete the configuration.