40
6 FAULT/SAFETY
6.1 ATTACK PREVENTION
6.1.1 ARP snooping
6.1.1.1 View ARP configuration
Click the "Fault/Safety" "Attack Prevention" "ARP Inspection" to check the current switches has been configured for
ARP information, this feature is turned off by default.
Figure 6-1: View Port ARP Inspection Information
6.1.1.2 ARP inspection function
In the ARP Inspection configuration, enable this function and then selected a port to configure some parameters.
Click the "Save" button to complete the configuration.
Figure 6-2: ARP Inspection Configuration
To Next Page
Loading...
