60
6.8.1.3 Disable multicast listener function
Click the "Fault/Safety" "IGMP Snooping", click "ON" button to disable multicast monitoring function:
Figure 6-43: Closed Multicast Listener Function Operation
6.8.1.4 Configuration multicast routing
Select VLAN, click "Router Port Add" button, to configure the multicast routing in the port panel:
Figure 6-44: Configuration of Multicast Routing
Multicast routing configuration steps are as follows:
Step 1: In the port panel to select multicast listener routing port;
Step 2: Select VLAN;
Step 3: Click on the "Add Router Port" button to complete the configuration.
To Next Page
Loading...
