16
The list of ports shows the current storm control property values:
1. Port: The number of the port.
2. Unknown-unicast: Unknown unicast packets control.
3. Broadcast: Broadcast packet control.
4. Unknown-multicast: Multicast packets control.
5. When the control value setting is not a multiple of 16, the system automatically matches the closest multiple of
16.
6. The control values of unknown-unicast, broadcast, and unknown-multicast, can only be a single value.
Clicking the corresponding port on the port panel selects the port to be configured.
Figure 4-4: Configuring Storm Control Information
You can also select multiple ports for batch settings.
Figure 4-5: Bulk Edit Configuration Information
To Next Page
Loading...
