55
2. INCREASE THE EXTENDED IP ACCESS RULE
Click "New ACL Rules", in the pop-up dialog box, select "Configuration Expand IP ACL", in the list of ACE, ID:0 ID:10,
rules for "Permit". Agreement: TCP, source IP address: any source IP address; purpose IP address: any destination IP
address, click "Apply" to complete the new:
Figure 6-33: Configuration Standard IP Access Control List
3. INCREASING EXPAND MAC ACCESS RULES
Click "New ACL rules", select "Configuration Expand MAC ACL" in the pop-up window, in list ID: 20，ACE ID: 0, Rules
"Deny", Source MAC address: 0088.9999.999A. Destination MAC address is the random MAC. MAC protocol type:
0x0086. After the configuration is complete, click "Apply":
Figure 6-34: Configuration Extended MAC Access Control List
Configuration instructions
ACE ID is an optional rule. Do not fill: the default is 0;
The extended IP protocol access control list, type: TCP, UDP, IP.
To Next Page
Loading...
