exit
18-5
18
Command Mode
Global Configuration, Interface Configuration, Line Configuration, VLAN
Database Configuration, and Multiple Spanning Tree Configuration.
Example
This example shows how to return to the Privileged Exec mode from the Interface
Configuration mode:
exit
This command returns to the previous configuration mode or exits the configuration
program.
Default Setting
None
Command Mode
Any
Example
This example shows how to return to the Privileged Exec mode from the Global
Configuration mode, and then quit the CLI session:
quit
This command exits the configuration program.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The quit and exit commands can both exit the configuration program.
Console(config-if)#end
Console#
Console(config)#exit
Console#exit
Press ENTER to start session
User Access Verification
Username:
To Next Page
Loading...
