Edge-Core ES3528-WDM

Class of Service Commands
31-6
31
Example
show queue cos-map
This command shows the class of service priority map.
Syntax
show queue cos-map [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-32)
Default Setting
None
Command Mode
Privileged Exec
Example
vlan priority
This command sets a fixed priority for all frames entering the specified VLAN
through a selected interface. Use the no form to restore the default status.
Syntax
vlan vlan-id priority cos_value
no vlan vlan-id priority
• vlan-id - VLAN ID (Range: 1-4094)
• cos_value – A number from 0 to 7, where 7 is the highest priority.
Console#show queue bandwidth
Information of Eth 1/1
Queue ID Weight
-------- ------
0 1
1 2
2 4
3 6
4 8
5 10
6 12
7 14
.
.
.
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
CoS Value: 0 1 2 3 4 5 6 7
Priority Queue: 2 0 1 3 4 5 6 7
Console#