IP Interface Commands
35-4
35
show ip interface
This command displays the settings of an IP interface.
Command Mode
Normal Exec, Privileged Exec
Example
Related Commands
show ip redirects (35-4)
show ip redirects
This command shows the IP default gateway configured for this device.
Default Setting
None
Command Mode
Privileged Exec
Example
Related Commands
ip default-gateway (35-2)
show arp
Use this command to display entries in the Address Resolution Protocol (ARP)
cache.
Command Mode
Privileged Exec
Command Usage
This command displays information about the ARP cache. The first line shows
the cache timeout. It also shows each cache entry, including the corresponding
IP address, MAC address, type (static,
dynamic, other), and VLAN interface.
Note that entry type “other” indicates local addresses for this switch.
Console#show ip interface
Console#
Console#show ip redirects
ip default gateway 10.1.0.254
Console#
To Next Page
Loading...
Need help?
General