ACL Information
23-19
23
ACL Information
This section describes commands used to display ACL information.
show access-list
This command shows all IP ACLs and associated rules.
Command Mode
Privileged Exec
Command Usage
Once the ACL is bound to an interface (i.e., the ACL is active), the order in
which the rules are displayed is determined by the associated mask.
Example
show access-group
This command shows the port assignments of IP ACLs.
Command Mode
Privileged Executive
Example
Table 23-4 ACL Information Commands
Command Function Mode Page
show access-list Show all IP ACLs and associated rules PE 23-19
show access-group Shows the IP ACLs assigned to each port PE 23-19
Console#show access-list
IP standard access-list david:
permit host 10.1.1.21
permit 168.92.0.0 255.255.15.0
IP extended access-list bob:
permit 10.7.1.1 255.255.255.0 any
permit 192.168.1.0 255.255.255.0 any destination-port 80 80
permit 192.168.1.0 255.255.255.0 any protocol tcp control-code 2 2
MAC access-list jerry:
permit any host 00-30-29-94-34-de ethertype 800 800
IP extended access-list A6:
deny tcp any any control-flag 2 2
permit any any
IP ingress mask ACL:
mask protocol any any control-flag 2
Console#
Console#show access-group
Interface ethernet 1/2
IP standard access-list david
MAC access-list jerry
Console#
To Next Page
Loading...
Need help?
General