Contents
viii
Displaying Basic VLAN Information 12-4
Displaying Current VLANs 12-5
Creating VLANs 12-6
Adding Static Members to VLANs (VLAN Index) 12-7
Adding Static Members to VLANs (Port Index) 12-9
Configuring VLAN Behavior for Interfaces 12-10
Configuring IEEE 802.1Q Tunneling 12-12
Adding an Interface to a QinQ Tunnel 12-16
Configuring Private VLANs 12-17
Enabling Private VLANs 12-17
Configuring Uplink and Downlink Ports 12-18
Configuring Protocol-Based VLANs 12-18
Configuring Protocol Groups 12-19
Mapping Protocols to VLANs 12-20
Chapter 13: Class of Service 13-1
Layer 2 Queue Settings 13-1
Setting the Default Priority for Interfaces 13-1
Mapping CoS Values to Egress Queues 13-3
Selecting the Queue Mode 13-5
Setting the Service Weight for Traffic Classes 13-6
Layer 3/4 Priority Settings 13-7
Mapping Layer 3/4 Priorities to CoS Values 13-7
Selecting IP Precedence/DSCP Priority 13-7
Mapping IP Precedence 13-8
Mapping DSCP Priority 13-10
Mapping IP Port Priority 13-11
Chapter 14: Quality of Service 14-1
Configuring Quality of Service Parameters 14-1
Configuring a Class Map 14-2
Creating QoS Policies 14-5
Attaching a Policy Map to Ingress Queues 14-8
Chapter 15: Multicast Filtering 15-1
Layer 2 IGMP (Snooping and Query) 15-2
Configuring IGMP Snooping and Query Parameters 15-3
Displaying Interfaces Attached to a Multicast Router 15-5
Specifying Static Interfaces for a Multicast Router 15-6
Displaying Port Members of Multicast Services 15-7
Assigning Ports to Multicast Services 15-8
Multicast VLAN Registration 15-9
Configuring Global MVR Settings 15-10
Displaying MVR Interface Status 15-11
Configuring MVR Interface Status 15-12
Displaying Port Members of Multicast Groups 15-14
To Next Page
Loading...
Need help?
General