118
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → ARC SET → CONTACT ID MSG → ALARM/RESTORE EV → ENABLE
OK → CONFIGURATION → ARC SET → CONTACT ID MSG → EXT. PWR L/R EV → ENABLE
OK → CONFIGURATION → ARC SET → CONTACT ID MSG → BATTERY STATUS EV → ENABLE
OK → CONFIGURATION → ARC SET → CONTACT ID MSG → ARMED EVENT → ENABLE
OK → CONFIGURATION → ARC SET → CONTACT ID MSG → DISARMED EVENT → ENABLE
OK → CONFIGURATION → ARC SET → CONTACT ID MSG → TEST EVENT→ ENABLE
EKB3
Enter parameter 24, event number & parameter status value:
[24011#] - Alarm/Restore Event
[24021#] - Main Power Loss/Restore Event
[24031#] - Backup Battery Status Event
[24041#] - Armed Event
[24051#] - Disarmed Event
[24061#] - Test Event
This command enables a particular CID message.
Enable CID Messages
To Next Page
Loading...
