Eldes ESIM264 - Page 119

MANUAL ELDES ESIM264 V2.0 119
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → ARC SET → USER MESSAGE → ALARM EVENT → ENABLE
OK → CONFIGURATION → ARC SET → USER MESSAGE → ARMED EVENT → ENABLE
OK → CONFIGURATION → ARC SET → USER MESSAGE → DISARMED EVENT → ENABLE
OK → CONFIGURATION → ARC SET → USER MESSAGE → EXT. PWR LOSS EV → ENABLE
OK → CONFIGURATION → ARC SET → USER MESSAGE → EXT. PWR REST EV → ENABLE
OK → CONFIGURATION → ARC SET → USER MESSAGE → BATTERY STATUS EV → ENABLE
OK → CONFIGURATION → ARC SET → USER MESSAGE → TEST EVENT→ ENABLE
EKB3
Enter parameter 25, event number & parameter status value:
[25011#] - Alarm Event
[25021#] - Disarmed Event
[25031#] - Armed Event
[25041#] - Main Power Loss Event
[25051#] - Main Power Restore Event
[25061#] - Backup Battery Status Event
[25071#] - Test Event
User Messages allow to select particular SMS messages to be delivered to users when CID
mode is enabled. By default, all User Messages are disabled.
Available User messages:
Alarm Event – SMS about alarm events.
Disarmed Event – SMS about disarm events.
Armed Event – SMS about arm events.
Main Power Loss Event – SMS about main power supply loss events.
Main Power Restore Event – SMS about main power supply restore events.
Backup Battery Status Event - SMS about low backup battery status.
Test Event - SMS with test information about the status of the device.
Enable User messages
when CID mode enabled