Eldes ESIM264 - Page 42

42
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → ZONES → WIRED ZONES → [ZONE 1... 12] → FORCE → DISABLE
OK → CONFIGURATION → ZONES → WIRELESS ZONES
→ RF ZONE [1... 16]→ FORCE → DISABLE
OK → CONFIGURATION → ZONES →
KEYBOARD ZONES → [1ST... 4TH] KEYBOARD ZONE → FORCE → DISABLE
OK → CONFIGURATION → ZONES →
EPGM ZONES → EPGM ZONE [1... 16] → FORCE → DISABLE
EKB3
Enter parameter 82, zone number & parameter status value:
[82xx0#]
Value: xx – zone number, range – [01... 44]
This command disables Force mode for a specied zone.
Disable Force Mode
for a Specied Zone