Eldes ESIM264 - Page 49

MANUAL ELDES ESIM264 V2.0 49
SMS
SMS text:
XXXX_SIREN
Example: 1111_SIREN
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET → SIREN SET → ALARM TIME
EKB3
N/A
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET → SIREN SET → BELL SQUAWK → ENABLE
EKB3
Enter parameter 29 & parameter status value:
[291#]
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → PRIMARY SET → SIREN SET → BELL SQUAWK → DISABLE
EKB3
Enter parameter 29 & parameter status value:
[290#]
This command indicates the alarm duration set.
Bell Squawk feature enables the siren to provide short beeps everytime the alarm system is
being armed. By default, this feature is disabled.
This command disables Bell Squawk feature.
See Siren Alarm
Duration
Enable Bell Squawk
Disable Bell Squawk
NOTE: Bell Squawk feature applies to wired sirens only.