3 Transducer Block Device Functions Proline Promass 83 FOUNDATION Fieldbus
148 Endress+Hauser
Info Line -
Display Mode
AUTO - OOS
! Note!
The option is not active unless one of the following was selected in the
parameter "Info Line - Assign" ( → Page 146):
• MASS FLOW BAR GRAPH IN %
• VOLUME FLOW BAR GRAPH IN %
• CORRECTED VOLUME FLOW BAR GRAPH IN %
Use this parameter to define the format of the bar graph.
Options:
STANDARD (Simple bar graph with 25 / 50 / 75% gradations and
integrated sign).
A0001258
SYMMETRY (Symmetrical bar graph for positive and negative directions of
flow, with –50 / 0 / +50% gradations and integrated sign).
A0001259
Factory setting:
STANDARD
Info Line Mux -
Assign
AUTO - OOS Use this parameter to define the second reading to be displayed in the
information line alternately (every 10 seconds) with the value defined in the
parameter "Info Line - Assign" ( → Page 146).
Options (standard):
OFF
MASS FLOW
MASS FLOW IN %
VOLUME FLOW
VOLUME FLOW IN %
CORRECTED VOLUME FLOW
CORRECTED VOLUME FLOW IN %
DENSITY
REFERENCE DENSITY
TEMPERATURE
TOTALIZER (1 to 3)
MASS FLOW BAR GRAPH IN %
VOLUME FLOW BAR GRAPH IN %
CORRECTED VOLUME FLOW BAR GRAPH IN %
OPERATION SYSTEM CONDITION
DISPLAY FLOW DIRECTION
AI (1 to 8) - OUT VALUE
PID - IN VALUE (controlled variable)
PID - CAS IN VALUE (external set point)
PID - OUT VALUE (manipulated variable)
DEVICE PD-TAG
Factory setting:
OFF
(Continued on next page)
"Display" Transducer Block/base index 1800
Parameter
Write access
with operating
mode
(MODE_BLK)
Description
To Next Page
Loading...
