Endress+Hauser Proline Promass 83 - Page 168

3 Transducer Block Device Functions Proline Promass 83 FOUNDATION Fieldbus
168 Endress+Hauser
Visc. - X1 AUTO - OOS Use this function to enter the compensation coefficient X1 (calculation
→ See Special Documentation on viscosity measurement for Proline
Promass 83I, SD102D).
User input:
7-digit floating-point number
Factory setting:
0
Visc. - X2 AUTO - OOS Use this function to enter the compensation coefficient X2 (calculation
→ See Special Documentation on viscosity measurement for Proline
Promass 83I, SD102D).
User input:
7-digit floating-point number
Factory setting:
0
Visc. - Y1 AUTO - OOS This parameter is only used for service purposes.
Amp. Device Type read only This parameter is only used for service purposes.
"Viscosity" Transducer Block/base index 2100
Parameter
Write access
with operating
mode
(MODE_BLK)
Description