83
Chapter3 Handling
Code128 Fence55555
Ladder6566
6
GS1-128 Fence 5 5 5 5 5
Ladder65666
ITF Fence66666
Ladder66666
GS1 DataBar Omnidirectional Fence 6 6 6 6 6
Ladder66666
GS1 DataBar Truncated Fence 6 6 6 6 6
Ladder66666
GS1 DataBar Limited Fence 6 6 6 6 6
Ladder66666
GS1 DataBar Expanded Fence 6 6 6 6 6
Ladder66666
UPC-A Fence77777
UPC-E Ladder77777
JAN13 Fence77777
JAN8 Ladder77777
EAN13 Fence77777
EAN8 Ladder 7 7 7 7 7
• Readability of a barcode varies by paper type, performance of a barcode reader, or other factors.
Furthermore, drop in print quality due to clogging of print head nozzles or skew of ink drops can
cause a barcode to become unreadable. In case it happens, it is recommended to print HRI char-
acters or take other measures.
• Due to characteristic of ink, ink seeped into paper may cause the bars of a barcode to be printed
thicker. In such cases, carry out [Bar Width Adjustment] that reduces the bar width by 2 pixels,
and increases space width by 2 pixels.
• If vibrations or shocks are applied to the printer during transporting or installing the printer, it
may cause drop in barcode rank. In that happens, barcode rank may improve by carrying out [Bi-
directional Printing Adjustment]. ("Bi-directional Printing Adjustment" on page 130
)
Barcode
Orienta-
tion
ANSI Grade C or higher minimum module size
[in units of 600 dpi]
Matte
Paper
Syn-
thetic
Glossy
Paper
Glossy
Film
High
Glossy
Paper
To Next Page
Loading...
Need help?
General
