Epson Stylus Photo R1800 - Where To Get Help

EPSON Stylus Photo R1800/R2400 Revision B
Disassembly And Assembly Disassembly 103
4.2.6.5 CSIC Board
1. Remove the Upper Housing. See Section 4.2.1.4 on page 76.
2. Release the Carriage lock, and move the Carriage Unit to the center.
See Section 4.2.1.3 on page 75.
3. Open the Ink Cartridge Cover.
4. Remove the Guide Pin that secures the Ink Cartridge from the Carriage
Unit with a flat-blade screwdriver, and remove the Ink Cartridge Cover.
Figure 4-77. Removing the Ink Cartridge Cover
Ink Cartridge Cover
Carriage Unit
Guide Pin
 Align the positioning holes on the Carriage Unit with the
two Guide Pins on the Ink Cartridge Cover.
 Make sure that the shaft on the center of the Ink
Cartridge Cover fits into the Bushing on the Carriage
Unit.
Figure 4-78. Reinstalling Ink Cartridge Cover
Guide Pins
Shaft
Bushing
Positioning Holes