Epson Stylus Photo R1800 - When Measuring Color at a Place the same as the Repair Work Site; Perform Entire Process; Entire Process Workflow

EPSON Stylus Photo R1800/R2400 Revision B
Adjustment Adjustment 150
When Measuring Color at a Place the Same as the Repair Work Site
1. Start up the Colorimetric Calibration Tool for Stylus Photo R1800 on a PC,
and click [Perform entire process].
Figure 5-22. Perform Entire Process
The following shows the process when [Perform entire process] is clicked.
Figure 5-23. Entire Process Workflow
END
Select port
Connect printer
Check printer connection
Ink setup
Perform cleaning
Automatic nozzle check
Printing automatic
nozzle check pattern...
End of printing of automatic
nozzle check pattern
Executing automatic
nozzle check...
Print chart
Printing chart...
Dry chart
Prepare Calibrator
Prepare chart
Measure color
Start color measurement
Write Color ID