Epson Stylus Photo R1800 - Printing Your Design

EPSON Stylus Photo R1800/R2400 Revision B
Disassembly And Assembly Disassembly 73
4.2 Disassembly
The flowchart below lists the step-by-step disassembly procedures. When disassembling each unit, refer to the page number shown in the figure.
Figure 4-1. Disassembly Flowchart
The step for the unit or discrete part within the broken line
is not the shortest removal step but is the step necessary
for removing the next unit or discrete part.
"Side Housing"
4.2.1.2 page 74.
"ASF Assy"
4.2.4 page 83.
"Rear Housing"
4.2.1.1 page 74.
"CSIC Board"
4.2.6.5 page 103.
"Paper EJ Frame
Assy."
4.2.6.6 page 105.
4.2.8.4 page 126.
"CR Motor"
4.2.7.1 page 122.
"CR Scale"
4.2.6.2 page 91.
"LED Board"
4.2.5.2 page 89.
"Paper EJ Frame
Assy."
4.2.6.6 page 105.
"LED Board"
4.2.5.2 page 89.
"APG Assy"
4.2.6.3 page 93.
START
"Ink Mark Sensor
and PW sensor"
4.2.8.2 page 125.
"Board Assy"
4.2.5.1 page 87.
"Lower Housing and
Printer Mechanism"
4.2.1.5 page 78.
"Upper Housing"
4.2.1.4 page 76.
"APG Assy"
4.2.6.3 page 93.
"Release Holder
Assy"
4.2.6.9 page 112.
"FLAG Release
Assy."
4.2.6.10 page 113.
"PE Sensor
Holder"
4.2.8.1 page 124.
"Upper Paper
Guide Assys."
4.2.6.11 page 114.
"PE Sensor
Holder"
4.2.8.1 page 124.
"APG Assy"
4.2.6.3 page 93.
"Print Head"
4.2.6.1 page 89.
"CR Scale"
4.2.6.2 page 91.
"Ink System Unit"
4.2.6.8 page 109.
"Upper Paper
Guide Assys."
4.2.6.11 page 114.
"PF Roller Shaft"
4.2.6.13 page 119.
"Waste Ink Pad"
4.2.2 page 80.
"Front Paper
Guide Pad"
4.2.3 page 82.
"PF Motor"
4.2.7.2 page 123.
"Carriage Shaft
and Carriage Unit"
4.2.6.4 page 95.
"CD-R Release
Lever Sub Assy"
4.2.6.7 page 106.
"Front Paper Guide
and Paper eject roller"
4.2.6.12 page 116.
"PF Encoder
Sensor Holder"
4.2.8.4 page 126.
"PF Encoder
Sensor Holder"
"CR Encoder
Sensor Board"
4.2.8.3 page 126.