Epson Stylus Photo R1800 - Troubleshooting of Card Loading Error

EPSON Stylus Photo R1800/R2400 Revision B
Troubleshooting Overview 45
Table 3-6. Troubleshooting of Card Loading Error
Occurrence
Timing
Phenomenon Detail
Faulty Part/
Part Name
Check Point Remedy
During printing Printing starts but paper is not
fed.
– 1. Check that the card size paper is loaded in the portrait
orientation.
1. Load the cards of the same size correctly,
and press the Paper Switch to eject the
jammed paper.
The card size paper is loaded
correctly, but Card Loading
Error is displayed.
PW sensor
1. Check that the PW Sensor FFC is connected to the CR
Encoder Board and PW Sensor Connectors.
1. Connect the FFC to the CR Encoder Board
or PW Sensor.
2. Check the PW Sensor or PW Sensor FFC for damages. 2. Replace the PW Sensor with a new one.
PW Sensor
Connector
FFC
CR Encoder Board
Connector