Epson Stylus Photo R1800 - Printing a Calibration Chart Workflow

EPSON Stylus Photo R1800/R2400 Revision B
Adjustment Adjustment 158
The following shows the process when [Print a Calibration Chart] is
clicked.
Figure 5-42. Printing a Calibration Chart Workflow
2. Execute Step 2 ~ 8 of the procedure “ When Measuring Color at a
Place the Same as the Repair Work Site”
(p150) to make a
Calibration Chart.
3. When the following screen is displayed, click [End], and follow
the on-screen instructions to mail the Calibration Chart to the
repair work site.
Figure 5-43. END
END
Select port
Connect printer
Check printer connection
Ink setup
Perform cleaning
Automatic nozzle check
Print chart
Printing chart...
Dry chart
Printing automatic
nozzle check pattern...
End of printing of automatic
nozzle check pattern
Executing automatic
nozzle check...