Epson Stylus Photo R1800 - When Measuring Color at a Place Different from the Repair Work Site; End; Printing a Calibration Chart

EPSON Stylus Photo R1800/R2400 Revision B
Adjustment Adjustment 157
14. When the following screen is displayed, click [End], and turn the printer
OFF then back ON again to end the adjustment. This action reflects the
color measurement values on the printer.
Figure 5-40. END
When Measuring Color at a Place Different from the Repair Work Site
1. Repair work site
1. Start up the Colorimetric Calibration Tool for Stylus Photo
R1800 on the PC, and click [Print a Calibration Chart].
Figure 5-41. Printing a Calibration Chart