Epson Stylus Photo R1800 - Removing the Upper Paper Guide Torsion Spring; Reinstalling the Upper Paper Guide Torsion Spring; Removing the Upper Paper Guide Assy

EPSON Stylus Photo R1800/R2400 Revision B
Disassembly And Assembly Disassembly 115
4. Remove the six Upper Paper Guide Torsion Springs from the Tabs on the
Main Frame, and draw out the Upper Paper Guide Torsion Springs from
the six Upper Paper Guide Assys.
Figure 4-111. Removing the Upper Paper Guide Torsion Spring
5. Lift the six Upper Paper Guide Assys from the Main Frame to release the
shaft referring to Figure 4-112., and remove the Upper Paper Guide Assys
to the rear.
Figure 4-113. Removing the Upper Paper Guide Assy
Upper Paper Guide
Torsion Sprig
Tab
Upper Paper Guide Assys.
Tabs
Make sure that the leading end of the Upper Paper Guide
Torsion Spring can be seen through the hole of the Upper
Paper Guide Assy.
Figure 4-112. Reinstalling the Upper Paper Guide Torsion
Spring
Hole
Upper Paper Guide
Torsion Sprig
ShaftShaft