EPSON Stylus Photo R1800/R2400 Revision B
Disassembly And Assembly Overview 70
4.1.2 Tools
The following table indicates the tools recommended for use for disassembly,
reassembly and adjustment.
The above tools are all available in the market
C A U T I O N
When transporting a printer that uses HAV Ink
Cartridges, remove all the cartridges beforehand.
Especially for air transportation, make sure to remove
cartridges because ink will flow into the Cap Unit via the
Print Head due to the reduction of the atmospheric
pressure, which may cause ink leakage.
Use only the recommended tools for disassembly,
reassembly and adjustment.
Refer to Table 4-1 Tool List on page 74.
Tighten screws to the specified torques.
Use the specified lubricants and adhesives.
Refer to Capter 6 "Maintenance".
Make the necessary adjustments under the instructions
given for disassembling.
Refer to Capter 5 "Adjustment".
Table 4-1. List of Tools
Tool Name Code
Phillips Screw Driver, No.1 1080530
Phillips Screw Driver, No.2 1080532
Flat-blade Screwdriver 1080527
Tweezers 1080561
Needle nose pliers 1080564
Acetate Tape 1003963
PF Tension Measuring Tool 1231678
Penlight –
To Next Page
Loading...
