Epson Stylus Photo R1800 - Removing Left PG Cam; Removing Right PG Cam; Right PG Cam Installation Direction; Rotating the Right CR Shaft Mounting Plate

EPSON Stylus Photo R1800/R2400 Revision B
Disassembly And Assembly Disassembly 99
18. Lift the Carriage Shaft within the hole on the Main Frame, and remove the
Spacer and Left PG Cam from the Carriage Shaft.
Figure 4-63. Removing Left PG Cam
19. Remove the Spacer and Right PG Cam from the Carriage Shaft.
Figure 4-64. Removing Right PG Cam
20. Pull the Right CR Shaft Mounting Plate away from the Tab on the Main
Frame and rotate toward you.
Figure 4-66. Rotating the Right CR Shaft Mounting Plate
Spacer
PG Cam (Left)
Hole on Main
Frame
Spacer
Right PG Cam
Install the Right PG Cam so that one of these positions
marked "0", "+" or "++" faces downward.
Figure 4-65. Right PG Cam Installation Direction
Right CR Shaft
Mounting Plate
Ribs