Epson Stylus Photo R1800 - Removing the PF Encoder Sensor Holder; Reinstalling the PF Encoder Sensor Holder

EPSON Stylus Photo R1800/R2400 Revision B
Disassembly And Assembly Disassembly 127
4. While pressing the Guide Pin on the PF Encoder Sensor Holder using
tweezers, slide the Holder upwards to release the three Tabs, and remove
the PF Encoder Sensor Holder.
Figure 4-142. Removing the PF Encoder Sensor Holder
Make sure that the PF Scale is in the slit on the PF Encoder
Sensor.
Figure 4-143. Reinstalling the PF Encoder Sensor Holder
Tabs
Guide Pin
PF Encoder Sensor
PF Scale
Slit