Epson Stylus Photo R1800 - Entering the USB ID; Creating a Data File

EPSON Stylus Photo R1800/R2400 Revision B
Adjustment Adjustment 160
2. Execute
Step 9 ~ 12 of the procedure “ When Measuring Color at a
Place the Same as the Repair Work Site”
(p150) and execute color
measurement on the Calibration Chart that was mailed.
3. Enter the USB ID printed on the Calibration Chart's header in the
edit box using 1-byte characters, and click [Next].
Figure5-46. Entering the USB ID
4. Click [Save...] to save the color measurement data.
• Color measurement data file: xxxxxxxx.data
(It is recommend to enter the product's serial No. as the file name
for management purposes.)
Figure 5-47. Creating a Data File
5. When the following screen is displayed, click [End], and mail the
color measurement data file to the repair work site.
Figure 5-48. END
Edit Box
This button is
enabled when
18 characters
are entered in
the edit box.