EPSON Stylus Photo R1800/R2400 Revision B
Stylus Photo R2400 Overview 204
8.4 Overview
This chapter describes unit-level troubleshooting.
8.4.1 Troubleshooting according to Panel Messages
After checking the printer LED and EPW3 error indications, you can grasp the fault location using the check list in this section. When you find the fault location, refer
to Chapter 4 "Disassembly and Reassembly" and change the corresponding part and/or unit. The following table indicates the check point reference tables
corresponding to the error states (LED and EPW3).
Table 8-5. Reference Tables of Error States
Error State Reference Table
Communication Error Refer to Table 8-6 "Troubleshooting of Communication Error" on page 205
Model Difference Refer to Table 8-6 "Troubleshooting of Communication Error" on page 205
Cover Open (Tray) Error Refer to Table 8-7 "Troubleshooting of Cover Open Error" on page 208
Paper Out Error Refer to Table 8-8 "Troubleshooting of Paper Out Error" on page 209
Paper Jam Error Refer to Table 8-9 "Troubleshooting of Paper Jam Error" on page 212
Paper Mismatch Error Refer to Table 8-11 "Troubleshooting of Paper Mismatch Error" on page 214
Ink Low Refer to Table 8-12 "Troubleshooting of Ink Low" on page 214
Ink Out Error Refer to Table 8-13 "Troubleshooting of Ink Out Error" on page 214
No Ink Cartridge/CSIC Error Refer to Table 8-14 "Troubleshooting of No Ink Cartridge/Ink Cartridge Error" on page 215
Maintenance Request Error Refer to Table 8-15 "Troubleshooting of Maintenance Request" on page 217
Fatal Error Refer to Table 8-16 "Troubleshooting of Fatal Error" on page 218