4. To prevent inks from settling down at the bottom, remove all ink cartridges,
shake them at least four times, and reinstall them to the printer. The printer
will automatically run a replacement cleaning cycle.
Step4.Ink Setup
5. Wait for the cleaning to finish.It will take about two minutes.
Step5.Cleaning
6. Load one sheet of A4 or letter- size plain paper, and click "Next" to execute
the automatic nozzle check.
Step6.Automatic Nozzle Check
7. Load one sheet of A4 or letter-size Photo paper, and click "Next" to print
the Calibration Chart.
Step7.Printing a Calibration Chart
C H E C K
P O I N T
If a warning message appears on the LCD saying that ink
level is low, replace the indicated ink cartridge(s) with a new
one.
Warning message
C H E C K
P O I N T
The recommended air temperature range for printing a
Calibration Chart is 15°C to 28°C.
To Next Page
Loading...
