Epson Stylus Photo R1800 - Page 177

EPSON Stylus Photo R1800/R2400 Revision B
Maintenance Overview 177
Figure 6-8. Lubrication (7)
Figure 6-9. Lubrication (8)
Figure 6-10. Lubrication (9)
Figure 6-11. Lubrication (10)
Figure 6-12. Lubrication (11)
<Lubrication Point>
The Driven Pulley Holder
<Lubrication Type>
G-26
<Lubrication Amount>
φ1mm x 2mm x 4 points
<Remarks>
Apply with a syringe.
(Pin Head:
φ1mm)
<Lubrication Point>
Contact point of the Driven
Release FLAG and the Upper
Paper Guide
<Lubrication Type>
G-26
<Lubrication Amount>
φ1mm x 5mm x 6 points
<Remarks>
Apply with a syringe.
(Pin Head:
φ1mm)
<Lubrication Point>
Contact point of the EJ Grounding
Spring and Front and Rear Paper
EJ Rollers
<Lubrication Type>
G-45
<Lubrication Amount>
φ1mm x 2mm x 2 points
<Remarks>
Apply with a syringe.
(Pin Head:
φ1mm)
Upper Paper Guide
Rear Paper EJ Roller
Front Paper EJ Roller
EJ Grounding
Spring
Right Side
<Lubrication Point>
The bushing of the Front Paper
Guide
<Lubrication Type>
G-45
<Lubrication Amount>
1. Apply evenly.
2.
φ1mm x 2mm
<Remarks>
Apply with a brush.
<Lubrication Point>
1. Left side of the PF Roller Shaft
(Left of the E-Ring)
2. Mounting location of the
Bushing 8
<Lubrication Type>
G-45
<Lubrication Amount>
1. Approx.
φ1mm x 5mm
2. All around the Shaft
<Remarks>
1. Apply with a syringe.
2. Apply with a brush.
1
1
2
Right Side
Front Paper
Guide
1
Left Side
Front Paper
Guide
Bushing 8
1
2
PF Roller