Epson Stylus Photo R1800 - Page 216

EPSON Stylus Photo R1800/R2400 Revision B
Stylus Photo R2400 Overview 216
At power-on After the Carriage has
detected the HP, an error is
displayed on the LED and
EPW3.
CSIC FFC 1. Check that the CSIC FFC is connected to the CSIC Board
Connector and Main Board Connector CN10.
1. Connect the CSIC FFC to the CSIC Board
Connector and Main Board Connector
CN10.
2. Check the CSIC FFC for damage. 2. Replace the CSIC FFC with a new one.
CSIC Board 1. Check the CSIC Board for damage. 1. Replace the CSIC Board with a new one.
Carriage Unit 1. Check that the electrodes in the Carriage, which make
contact with the CSIC Board, are not bent.
1. Replace the Carriage Unit with a new one.
Table 8-14. Troubleshooting of No Ink Cartridge/Ink Cartridge Error
Occurrence
Timing
Phenomenon Detail
Faulty Part/
Part Name
Check Point Remedy
CN10
CSIC Board
Connector
CSIC FFC
CSIC Board
Electrode