Epson Stylus Pro 4400 - Page 164

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Troubleshooting Troubleshooting Based on Panel Messages 164
PAPER NEAR END
CONVERSION CARTRIDGE LIFE NEAR END
Item Description
LCD Panel message PAPER LOW
LED display Paper check LED: Blink
Explanation Occurs when the current remaining paper counter value is
less than the near end setting value while the remaining
paper detection is on with roll paper or cut paper loaded.
Recovery
Execute one of the following:
• Set the near end setting value so that it is more than the
current remaining paper counter value, using roll or cut
paper menu of the remaining paper detection in the
printer setting menu.See "Remaining paper detection
(p.48)"
• Reload paper.
Item Description
LCD Panel message TIMES REMAINING
LED display
Ink check LED: On
Pause LED: On
Explanation The number of usable time of the conversion cartridge is
less than ten.
Recovery Press the [Pause] key.