Epson Stylus Pro 4400 - Page 341

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Disassembly & Assembly Disassembly Procedures 341
11. Release the "Tube, Supply, Ink" from the tabs of the "Holder, Tube, A".
Figure 4-194. Tube, Supply, Ink Release
12. Remove the three screws that secures the "Cover, Tube" to the printer
frame, lift it upward, release the three upper tabs, and then remove the
"Cover, Tube".
 C.B.P. 3x8: 3 pcs.
Figure 4-195. Cover, Tube Removal
Tabs
 Hitch the three tabs on the "Cover, Tube" to the "Guide,
Tube, CR" before tightening with the screws.
 Tighten the screws in the order shown in Figure 4-195.
C.B.P. 3x8
Cover, Tube
Tabs
12 3