Epson Stylus Pro 4400 - Page 370

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Adjustment Overview 370
Motor Assy., PF 1 PF Timing Belt Tension Adjustment {{P.378
2 T&B&S (Roll Paper) {{P.390
3 T&B&S (Cut Sheet) { --- P.391
4 Reset PF Motor Counter { --- P.441
5 Reset Paper Ejection Switching/PG
Switching Counter
{ --- P.441
6 Reset Paper Ejection Switching/Reset
PG Switching Counter
{ --- P.441
Pump Motor 1 Reset When Cleaning Unit Change { --- P.443
Motor Assy., PG 1 Reset Paper Ejection Switching/Reset
PG Switching Counter
{ --- P.441
Paper Thickness
Sensor
1 Paper Thickness Sensor Adjustment
{{P.380
Multi Sensor 1 Multi Sensor Position Adjustment {{P.385
2 Multi Sensor Level Adjustment {{P.389
3 T&B&S (Roll Paper) { --- P.390
4 T&B&S (Cut Sheet) { --- P.391
5 Platen Position Adjustment {{P.405
6 Multi Sensor Adjustment for Auto
Nozzle Check
{{P.402
7 Auto Uni-d Adjustment {{P.401
8 Auto Bi-d Adjustment (P.G. 1.2) {{P.430
CR Encoder
Sensor
1 CR Encoder Sensor Position
Adjustment
{ --- P.382
Rear Sensor 1 Rear Sensor Adjustment { --- P.407
PF Encoder
Sensor
1 1000mm Feed Adjustment { --- P.407
2 T&B&S (Roll Paper) { --- P.390
3 T&B&S (Cut Sheet) { --- P.391
4 PF Micro Feed Adjustment Bi-D { --- P.435
Table 5-2. Required Adjustment Items/Execution Order
Name Adjustment Item RP
*1
RM
*2
Ref.